WoL Keeper icon

WoL Keeper

Keep ethernet Wake-on-LAN working forever in standby (rooted TV with Homebrew Channel, webOS 22 or newer)

⚡ WoL Keeper

Keep ethernet Wake-on-LAN working forever in standby.

On recent LG TVs, WoL only works for ~15 minutes after you turn the TV off — then the TV descends into a deep "zero-watt" standby that powers off the ethernet PHY entirely, drops off your network, and can only be turned back on with the remote.

WoL Keeper fixes this by combining two mechanisms: - Enables the TV's native Always Ready mode (the sanctioned 24/7 warm standby, so the micom's ~4 h warm-standby watchdog never force-kills it) and neutralizes its nightly deep-off window, which is not exposed in the TV's settings UI. - Installs a small self-healing keepalive daemon (a transient systemd unit, recreated each boot via a Homebrew Channel startup hook) that renews a sleepd activity so the suspend path never executes.

The TV then stays reachable on ethernet and wakes from magic packets at any time — verified across 17+ hour overnight standbys, including the TV's own scheduled standby maintenance reboots.

Requirements

  • Rooted TV with Homebrew Channel
  • webOS 22 or newer. Always Ready is what holds warm standby open, and it arrived on the 2022 models. Enable checks that both systemd and the alwaysOn setting are present before it changes anything, and verifies afterwards that the keepalive unit reached active and that the settings read back as written — so on firmware where it cannot work you get told, rather than a silent no-op reported as success.

Notes

  • Standby power consumption is higher than the deep zero-watt state — that is inherent to keeping the network interface powered.
  • Press Disable before uninstalling. Disable restores the Always Ready settings you had before Enable (saved at Enable time, not LG's defaults) and removes everything else. If you uninstall while enabled, the running keepalive notices within about two minutes that the app is gone, restores your saved settings and removes itself — but if the TV is switched off or rebooted before then, the Always Ready override stays behind.
  • The read-only rootfs is never modified; the keepalive unit lives in /run (tmpfs) and everything else under /var/lib/webosbrew.

Compatibility

Developed and verified on OLED77G5WUA, webOS 25 (10.3.0), FW 33.30.97. Reports from other models — especially a different generation — are very welcome; please open an issue with your model, webOS version and what the app reported. A failure report is as useful as a success one.